Study on the mechanism for ammonium chloride extraction of negative component calcium from vanadium-bearing steel slag

Authors

  • Yu Xie
  • Guohua Ye Kunming University of Science and Technology
  • Qi Zuo
  • Ziyang Chen
  • Hao Zhang

DOI:

https://doi.org/10.17159/

Abstract

考虑到含钒钢渣的钙含量高和从炉渣中提取钒的成本高,将氯化铵利用预处理程序来提取含钒钢渣。并且,还从热力学和动力学方面研究了萃取过程的机理。当氯化铵浓度为20%,萃取温度为363K,额定为-0.074 + 0.048mm,搅拌速度为350 RPM,萃取时间为5h时,萃取效果最佳,钙组分的萃取率可达62.4%。。 。热力学研究和xrd分析表明,在氯化铵提取钒钢渣过程中,氯化铵主要与钢渣中的硅酸钙发生反应,钙被滤出后,钢渣形成了钒酸盐矿物的新相,。 .......这表明,提取整个工艺主要受低温表面化学反应控制。温度升高后,通过固相膜扩散控制萃取过程。

Downloads

Download data is not yet available.

Published

2026-04-15

Issue

Section

Papers of General Interest